Hi guys, anyone had any experience with the otter ground screws? Was looking at these as an option for ground level deck... https://www.bunnings.com.a ...
Thanks @Adam_W, it’s a brand new build.. I think I’ll go with the angle grinder option with a diamond tipped blade or similar.. This should get me sta ...
Hi @jays2007 the deck looks great. I suppose what you do around the deck depends on the aesthetic you are going for and how it links to the landscape ...
Nice work @jays2007
I always use/recommend H4 200x50mm sleepers for the outside frame of the deck as it can be in contact with the soil so you don' ...
If you go with the H4 treated pine stumps/posts, just dig a hole that's 400mm deep and set the stump/post 300mm into the ground/hole leaving 100mm bel ...
I don't have experience with these @jays2007 but depending on your soil type, I'd suggest being conscious of their sturdiness over time.
90x90 or 10 ...
@jays2007 first just make sure there's no chance of it being asbestos-based board. Anything installed post late '80's should be safe.
Neat cuts to set ...
Ledger on fixed structure is a good way to go @jays2007. In your case it's going to require cutting into/away some of the Hardieplank.
Use minimum 100 ...
Hi @jays2007,
Welcome to the community. We are looking forward to seeing your decking project completed - it should be a great addition to your home ...
When you're installing a deck, use existing structures where possible to install a ledger. I generally use minimum 10g 100mm Ramset anchors with 400mm ...
Hi guys, anyone had any experience with the otter ground screws? Was looking at these as an option for ground level deck... https://www.bunnings.com.a ...
Thanks @Adam_W, it’s a brand new build.. I think I’ll go with the angle grinder option with a diamond tipped blade or similar.. This should get me sta ...
