Update! So the rain finally eased over the weekend and we have discovered that our soil under the deck is quite boggy so I’ve had to readjust it in se ...
@EricL @MitchellMc Thank you again for the feedback. Unfortunately it’s been raining cats and dogs the last couple of weeks so my projects been broug ...
@EricL Wow! Thank you. You have really gone above and beyond with helping me out with these footings and I’m so grateful for your information, recomm ...
Hi Eric, thank you! Can you give me some advice as to the form work for the footings? What sort of cement do you recommend, and do I need to dig four ...
@Noyade The 2metre bamboo screens was priced at $79 each but we were originally after the 1.8metre which was on a high rack and they don’t like to bri ...
For our little outdoor privacy project we’ve purchased this gazebo kit. We are currently building a GoodTimes 3.34 x 3.34 Merbau deck from Bunnings ...
So this was what we started with, and this is where we are at. I’m building the deck using the 3.34 x 3.34 modular decking kits Bunnings sells. We ar ...
Hi Mitchell, I am using these hex head screws: https://www.bunnings.com.au/zenith-12g-x-65mm-galvanised-hex-head-metal-screws-50-pack_p2420704 I chos ...
If you're using the Lattice Makers 1800 x 900mm Black Bamboo Half Raft Screen Panel and screwing it directly into the top and bottom rail, then slight ...
@EricL Wow! Thank you. You have really gone above and beyond with helping me out with these footings and I’m so grateful for your information, recomm ...
@Noyade The 2metre bamboo screens was priced at $79 each but we were originally after the 1.8metre which was on a high rack and they don’t like to bri ...
So this was what we started with, and this is where we are at. I’m building the deck using the 3.34 x 3.34 modular decking kits Bunnings sells. We ar ...
I have finally gotten round to spray painting the exterior to provide a dark base for any gaps natural would may expose for when I put the wood around ...
Hi Jason, I have fully sanded down old Chesty and have yet to start with putting wood on it. Have been doing a couple of other house projects that ne ...
Thank you! I did wonder about the vent and covers.... I will make everything around it so they’re not covered. How do you suggest I attach the wood? W ...
Alright guys I’m making a start on Old Chesty this afternoon. I’m not sure how to post pictures of the progress yet but so far I’ve flipped it over a ...
Hi All, I joined this group in hopes that I can learn from you knowledgeable people as I love a bit of DIY around the home but I don’t know a lot abo ...