In 2011, I built this lovely Santa throne from plans bought from the USA. The majority of the timber came from Bunnings Parafield. Since then it has s ...
Hi everyone, One thing that overwhelms me as a beginner, are screws and bolts. I don't quite understand the numbers on them, the gauge and which gauge ...
5-6 years ago I painted my interior doors in gloss finish Dulux Wash 'n' Wear Acrylic paint in Chalk USA.
I have scratches and dents I've addressed an ...
I'm getting close to throwing my doorbell out the window. We recently switched from fibre to 5G. All is good BUT silly me deleted the doorbell from ...
Hi!
Is there a product or way to repair or replace these exterior rubber window edge seals?
My house is an early 90's brick veneer structure. The rubb ...
Hi All, I recently bought an old town house with predominantly west facing single-glazed windows and am now looking at adding an extra glaze to the wi ...
Hello,
In my under house storage area there is an opening (roughly 66cm x 82cm) like a window, but with no glass in it. The metal bars are cemented in ...
We have managed to almost refloor our entire house using the Tarragona Walnut Floor Select Laminate flooring (I/N 0135648) but have come to find, with ...
So here is the throne in its better days.
Now it is looking worse for wear. The seat has golden-ish metal buttons with metal loops. They show tarnish. ...
Hi guys,
looking at options on what I should do with these posts on my front porch.
They both have rust damage at the base of the posts, which has a ...
Hi,
I need to install James Hardie axon cladding, based on my reading on internet, I can use brad nails or fiber cement nails. If I prefer fiber cem ...
Hi all,
I'm confused about steel framing lol, normally I would just timber it but out here in the farm, that not ideal
Steel track and stud... is it ...
I needed to make something to lift two plant pots off a floating timber panel floorboard in one hour flat, so I used some offcuts from a previous proj ...