Hi Guys, We're renovating our 1970s home and getting ready to remove some walls. As I'm working towards the installation of a wind column in the bri ...
Hi everyone,I recently had a plumber reroute a copper water pipe through a brick wall, and the result left a noticeable gap in the brickwork, as shown ...
I’m looking to improve the energy efficiency of our older home, as it gets uncomfortably warm in summer and cold in winter. I’m considering retrofitti ...
Hi All,
i am planning to build a pergola 8m x 4.8m with the beams spanning the 4.8.
what is the recommendation on beam size. I would like to use trea ...
I want to make insect screens for an old Victorian house, so I want to make the frames from timber.
They will be fitted to the outside of the window. ...
Hi everyone,I've been a longtime reader of the workshop forum and have really enjoyed the positive and constructive community atmosphere, not to menti ...
Hello
My house has a slight negative grade from the street. Front carport and roof gutter are connected to kerb. The 3 rear gutters need to connect ...
Hi Community,
I have a split level home where the top most level is the kitchen, living room and dining in an open plan configuration.
This space is a ...
I’m working on my first project and looked at guides on using my Craftright pocket hole jig. I’m struggling with the first step of tightening the dept ...
Hi There, I have a double front door that I need to make more secure.
I like the look of the Bastion Sutton Door that I can get from Bunnings. These ...