How to remove flat rivets?

[Bethling]

How do I remove flat rivets? Here’s a picture of what I mean.

 

 

[EricL]

Hello @Bethling 

Welcome to the Bunnings Workshop community. It's sensational to have you join us, and thanks for sharing your question about removing blind rivets. 

I propose either grinding the back of the rivet with a grinding tool or cutting it with a multitool from the side. 

Let me call on our experienced members @Dave-1 and @Nailbag for their suggestions.

Please remember to wear personal protections such as gloves, goggles and a mask when working on your project.

If you need further assistance, please let us know.

Eric

[Nailbag]

Hi @Bethling you can use a HSS drill bit the size of the inner sleeve as per the image attached to drill the rivet out.

Regards, Nailbag

 

[Dave-1]

Good Morning @Bethling 

The rivets? Pins maybe? Look domed. I like @EricL suggestion of using a grinding tool to grind the dome off. (I would do the underside as once cut the whole thing should pop out) 

or 

Flatten the dome using a hammer or a Craftright 8 Piece Long Series Punch Set  or even a Craftright 3 Piece Nail Set Punch  to give an indentation into the rivet for the drill to grab and then use a drill to drill out the top part. (from the underside)

Dave