The Bunnings Workshop community can help with your home improvement projects.
I love to create mosaic tables and here I made a centrepiece using left over tile and scrap timber I had at home.
I made this while doing a larger project, so I was able to use up the left over tile adhesive and grout too.
https://www.bunnings.com.au/davco-1-5kg-misty-grey-sanitized-grout_p0271855 https://www.bunnings.com.au/davco-10l-grey-one-pot-premixed-tile-adhesive_p6650011?store=8172&gad_s...
https://www.bunnings.com.au/qep-75mm-adhesive-square-notch-floor-spreader_p6820178
Firstly I found a piece of scrap wood and got everything out that I needed.
Tiles
Adhesive
Adhesive applicator/scraper
Grout
Tape
Sponge
Bucket of water
I then got to work setting the tile pieces down in a pattern I was happy with. I broke a few pieces up using a hammer to create smaller tiles when needed.
When I was happy with the pattern, I transferred them off the board so that I could apply the adhesive. I taped around the edge of the board to hold any loose adhesive in place.
Then using the adhesive scraper, I applied the adhesive and scored lines down the centre like this.
Then I placed each tile back on the board. This is so satisfying to do!
Once all the pieces were in place. I left it to dry for 24 hours.
After the adhesive had set, it was time to grout.
Once mixed with water, the grout is a thick paste.
I applied using my gloves hands and pushed into each crevice.
I then used a damp sponge to smooth it out and remove the excess
I then left it to dry overnight.
the following day I used an orbital sander with fine grit sandpaper to smooth off any rough edges and blend the grout into the timber.
I then waxed the entire piece using white wax. This sealed the grout and tile and makes it easier to clean.
And then I set this in the middle of my dining table. It makes a nice setting for flowers, candles, picture frames, or could be used to serve a bowl of chips and dip!
I love this travertine tile, and love how it ties in with my outdoor area tiles.
Such a cool and unique project, @kimamery! I was thinking of making something similar the other day, then your guide popped up! What a great centerpiece this would make for a table setting.
Thanks so much for sharing, as I trust it will inspire many of our members to give something like this a go.
Mitchell
Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects
We would love to help with your project.
Join the Bunnings Workshop community today to ask questions and get advice.