How to remove palms?

[DIY-Dilatante]

We have a cluster of traveller palms that have sprouted in the narrow space between the garage and the side fence. After many years they've not only filled that space, but also pushed over the fence. The neighbouring property has been recently purchased and the new owner has served us with a remediation notice, so we're under some time pressure to get this sorted.

A friend attempted to cut them using his (brand new) chainsaw, which resulted in the machine becoming clogged with wet sticky palm chips, and its battery overheating, with rather little progress. So I'm looking for an alternative approach.

I could like to cut them off at ground level, so that we can begin repairing the fence. I imagine herbicide may be necessary to prevent regrowth, but we can deal with that later.

Currently I'm contemplating something like a "hand chainsaw", which comprises just the toothed chain with pull handles on each end, such as the Darlac Pocket Chain Saw (I/N:0780249), or a wire saw, which is essentially a length of wire with embedded abrasive grit, such as the Haron Saw Cable CS100 (I/N:0643415).

Cable saws are more commonly used for cutting hard materials, such as semi-precious stones or plastic pipe, but they will cut timber at a pinch. They're a lot cheaper than hand chainsaws, by a factor of ~5, but of course they wear out much faster.

However both of these products are 600mm, while the largest of the palms is 700mm⌀ so both are far too short.

Does anyone know of a longer version of either of these, preferably around 1500mm?

Is it possible to join two Darlac chains end-to-end?

What about a much longer wire saw, that can be looped around a drive wheel, and either cranked or motor-driven?

[EricL]

Hello @DIY-Dilatante 

I've had a good look and could not find longer versions of the hand saws you mentioned. There are also no joining kits available for the Darlac chain saw. However, I suggest looking at the Ozito 1900W 356mm (14") Corded Chainsaw ECS-1935. I also propose changing your cutting technique on the palm tree. Instead of doing a traditional straight cut, I propose doing small cuts out of the trunk of the palm tree. In this manner the chain saw will not have to battle the entire body of the tree but only small sections of it. 

By slowly cutting away at the trunk the chainsaw will not have to work so hard, and you'll also prevent it from overheating. You can also use an XU1 710W Reciprocating Saw in conjunction with the chainsaw.

Let me call on our experienced members @Dave-1 and @Nailbag for their recommendations on how to cut the palm tree.  

If you have any other questions we can help with, please let us know.

Eric

[Dave-1]

Good Evening @DIY-Dilatante 

Palm trees are a pain in the neck to cut up, as you have found they blunt saws and gum up the works.

A couple of things, the trees sound large and I mean large. My local council has any tree over 5m needs permission to chop it down from the council (they come out and asses it and yes there is a fee) This includes palms. I would suggest to check first otherwise the fines can be high.

As to cutting through a palm, we are back to the trees being tall and in a narrow space. Unless you are a professional tree lopper I would be hesitant to chop it down. I have cut a few down and they did NOT behave well and do what I wanted lol Next to a garage or fence.... yeah nah. professional and save yourself extra costs longer term.

That blade you mention is what I would use but with two people, one either end and do a straight cut. I would also do multiple cuts tro work my way through the trunk so as to not jam the blade in that fibrous trunk. Having a trunk fall even in sections doing it like this I see problems arising. 

How tall are the trees? If they are top of the ladder type then using that hand saw to do small chunks from the top down maybe, you may have more control over the fall that way? (rem never stand on or above the second rung from the top of a ladder, gravity is not your friend at this point... (yes I have and yes I have fallen a few times ))

Last suggestion, is there a chance of a photo of the palms, we may be able to come up with a method/sequence. 

Dave

[EricL]

Hello @DIY-Dilatante 

Just to follow up on @Dave-1's excellent advice. If the tree proves to be too much of a challenge. I suggest engaging the services of a professional tree lopper just to be on the safe side. They will have the tools, knowledge and experience to bring the tree down safely. I also recommend checking your local council's rules and regulation in regards to cutting down trees on your property.

If you need further assistance, please let us know.

Eric

[Nailbag]

Hi @DIY-Dilatante 

100% best tool to use to cut both the trunk and the fronds themselves is a reciprocating saw with a long pruning blade. They don't bind up, very fast and efficient with not maintenance and a lot safer.  Check this video I made many years back showing an old Qld'r work colleague using it just for that purpose around his house. We were easily going through trunks 12-16" in diameter. 

Nailbag