Share
Welcome to the Bunnings Workshop community @firenevac. It's great to have you join us and many thanks for your question.
The Matrix Decor panels can be screwed directly to the Colorbond fence posts and rails with Buildex 12-14 x 35mm Climaseal Hex Head With Seal Cladding Tek Screws 5 Pack. Depending on the height at which you want to fix the Matrix panel, you might find there is no top rail to screw into and just the Colorbond sheet. If this is the case you can fix strips of timber between the Colorbonds upright posts and then screw the panels to the timber.
Here's a helpful step-by-step instructional video on installing the Matrix frames which I trust you'll find useful.
Please let me know if you need further assistance or had any questions.
Mitchell
Hi @firenevac,
Just wanted to let you know that @MitchellMc will be back on the site tomorrow to assist you with your fencing project.
Let me tag a few helpful members who might be able to share their thoughts on next steps with you:
@Shannon, @Brad, @ProjectPete, @royq , @Nikkaz
Let me also extend a warm welcome to the Bunnings Workshop community. Please don't hesitate to reach out anytime you need a hand getting the most from the forum.
Thanks,
Jason
Hi @firenevac,
The screws I mentioned, Buildex 12-14 x 35mm Climaseal Hex Head With Seal Cladding Tek Screws 5 Pack, are self-tapping and will drill their own holes. The screws included in the kit are not self-tapping and will require a 4mm pilot hole as per the installation guide.
Bear in mind that if you don't install a mounting rail and instead screw the Matrix screen directly into the fence panel, then the screws will penetrate out the other side of the fence.
Another option to avoid screwing into the fence would be to drive a post on either side of the panel into the ground directly in front of the fence. The Matrix screen can then be screwed to the posts.
Please let me know if you need further information or had any questions.
Mitchell
Welcome to the Bunnings Workshop community @Simone2. It's great to have you join us and many thanks for your question.
You can use Zenith Gold Passivated Countersunk Head Metal Screws to attach the timber to your fence posts. Select a length suitable for going through your choice of timber.
To attach the Matrix screen to the timber you can use Otter 12g x 35mm Matt Black Class 3 Hex Head Screws - 90 Pack to suit the black screen.
We look forward to hearing more about your Matrix screen project and would encourage you to let us know if you need assistance or would like to share it with us. I trust you'll find loads of inspiration within the community as our creative members are contributing their projects here all the time.
Mitchell
Hi @firenevac,
Many thanks for the update.
It's great to hear you've had success with installing your Matrix screens onto a Colorbond fence. You might like to post some images of your screens as I trust it would provide other members with the confidence to give it a go themselves.
Mitchell
You might also like
