Workshop
Ask a question

The Bunnings Workshop community can help with your home improvement projects.

How to fix rotten timber pool surround?

LE2
Just Starting Out

How to fix rotten timber pool surround?

Hi, I need to redo my pool surround and copping BC the timer has been eaten by an orange fungi, and the nails are popping up. 

It's dangerous to walk around. As it was only done 7 years ago I'm after the most economical solution. The pool measures 4x5 mts, the decking is not huge. Please see attached photos.

1000005579.jpg

1000005581.jpg

1000005580.jpg

1000005585.jpg

1000005584.jpg

1000005586.jpg

1000005581.jpg

     

Jason
Community Manager
Community Manager

Re: How to fix rotten timber pool surround?

Hi @LE2,

 

Welcome to the Bunnings Workshop community. We're so pleased to have you join us.

 

Seven years seems an exceptionally short lifespan for any deck so I'm hopeful that the damage is not terribly serious. It's certainly common for screws or nails to pop up as the timber moves, so that is a common maintenance job to screw and/or nail them down again. It also looks like your deck would benefit from sanding and oiling like in my own deck renewal project

 

What would be much more concerning from a safety point of view is rotting timber. Is there any evidence of that? The guide How to renovate a timber deck by @Adam_W would be a great place to start for what might be involved if the damage was more serious.

 

If you were looking to totally replace the deck, Adam also provides great inspiration with his poolside timber-free deck with steel frame.   

 

Please have a thorough inspection of the deck and let us know if there is any concerning damage. We are very happy to answer any follow-up questions you might have regarding next steps. We're here to help.   

 

Jason

 

See something interesting? Give it the thumbs up!
MitchellMc
Bunnings Team Member
Bunnings Team Member

Re: How to fix rotten timber pool surround?

Hi @LE2,

 

I'd encourage you to have a few quotes done on a restoration of the deck rather than a replacement. If the deck can be saved, then I think it's worth going that route, as the Merbau decking should still be in a reasonable state, just requiring a sanding.

 

The popped screws are a little concerning, and I suspect there might be something going on with the timber which has been used for the structure and joists, and perhaps it has rotted. When you say the deck was done seven years ago, was that new decking laid over an existing frame from a previous deck? If it was just new decking over an old frame, I presume that the frame, which might have been reasonably seven years ago, has now rotted.

 

Please let me know if you have any questions.

 

Mitchell

 

See something interesting? Give it the thumbs up!

Why join the Bunnings Workshop community?

Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects