Share
Hey everyone,
We recently purchased a coffee table that came with a fir wood top that is raw & unfinished. We purchased hoping we could stain and seal the top (so it doesn't soak in food and drink) to match to our dining table. Obviously they won't be an exact match but is there a stain colour that would get us closer? The dining table in the background of the picture was recycled messmate that we finished with danish oil.
Thanks so much!
Welcome to the Bunnings Workshop community @Laura_P. It's amazing to have you join us and many thanks for your question.
Initially, I'd like to address that the Fir timber has had either a greyed wash aging effect applied to it or it has been aged naturally. I would guess that it is some type of wash effect as aging the timber naturally doesn't really lend itself to mass-producing products. Natural aging causes cracks and distortions in the timber making it hard to finish into a coffee table.
The reason for mentioning this is, in my opinion, that it will be unlikely for you to be able to stain it to achieve something similar to the dining table. It is one thing to stain light coloured timber to match a darker coloured timber but your coffee table is already a darker tone already.
Below I've added a picture of what Douglas Fir would look like in its raw form. It has similar colouring to pine and you could certainly use a "golden" tinted stain to get a close match to the dining table. You might be able to sand back the weathered effect to expose the raw unfinished timber, but obviously there is a certain risk associated with that. I'd recommend you try on the underside of the table if anything.
Let me mention some of our keen woodworkers @woodenwookie, @r23on, @Poppop and @woodalwaysworks who might like to join the discussion on staining timbers.
Please let me know if you need further information or had questions.
Mitchell
Hello @Laura_P
Looks like that top has seen a few summers. I suggest a light sand to see how far the seasoning has travelled. If it takes too much to sand down you may have to use integrain timber reviver. To test the results of staining and varnishing turn the top upside down and apply on a small tiny portion of the bottom of the top to see the possible results. Once you find something you like you can commit to staining the top portion. Let it dry indoors away from the sun. Once the stain/varnish has dried off then you may bring outdoors. Lightly sand and re apply once a year for longevity and protection. Apply extra on feet to protect against water soak in rainy season.
Cheers,
Red
I am a Bunnings team member. Any opinions or recommendations shared here are my own and do not necessarily represent those of Bunnings. Visit the Bunnings website for assistance from the customer service team.
Thank you all so much. Here is a pic where we’ve lightly sanded a section. Looks like we may be able to lighten it a little bit with sanding before we test out staining.
That's perfect. It will be much easier to find a stain to mimic the dining table starting with that sort of colour. I'd recommend you take your coffee table into a Bunnings store during non-peak hours and speak to one of our helpful team members. If you take a picture of your dining table with you I'm sure the team member would be more than happy to try a little sample of colours on the bottom of the table for you.
Please let us know how you go.
Mitchell
Whether that grey finish is a wash or just weathering, I doubt there's a stain that changes grey into the colour of the dinning table. I'd spend the time sanding it back to raw timber before staining it. I'll add a photo of a wishing well I made out of pine and stained with teak stain. Sort of comes close to the colour you're chasing. However, if you sand the top back to raw you could use Danish oil again and probably get an even closer match.
