Share
Hi All,
Very new to DIY but looking to make a bench seat in our living room and planning to use a strong frame made out of 90mm by 45mm pine. I was planning to connecting the pieces together using pocket hole screws and wood glue, but after searching online I'm not sure if I can find a suitable pocket hole jig. I can see there is a Kreg Pocket Hole Jig 320, but it is only designed for wood up to 38mm thickness. There I have also heard that there is a Kreg Pocket Hole Jig XL but that appears it might be for 50mm boards and larger. I'd be planning on creating the pocket holes on the smaller width side (45mm), so one is too small and the other appears too big.
Can anyone give me some advice on which one I need?
Cheers!
(Image below a model of the frame being built)
