Workshop
Ask a question

The Bunnings Workshop community can help with your home improvement projects.

Mounting an Ikea Besta TV Unit to the Wall – Need Advice

SouthFieldSnoop
Just Starting Out

Mounting an Ikea Besta TV Unit to the Wall – Need Advice

I’m planning to mount two Ikea Besta TV units (two-shelf models) to the wall, but it’s proving to be more challenging than I anticipated. Here’s the situation:

  • Each unit has three mounting points where screws are required to secure it to the wall.
  • I don’t plan to store heavy items in the shelves, and the TV will be wall-mounted separately.
  • Tried reaching out to Ikea , but they were not able to help

The problem is the mounting points on the units don’t fully align with the wall studs. I can get one stud per unit, but the other two mounting points will have to be fixed into drywall. After doing some research, I’ve come up with a few potential solutions, but I’m unsure which is the best approach.
1. Use hollow wall anchors:

  • Attach two mounting points with heavy-duty hollow anchors in the drywall.
  • Secure the third mounting point into the stud.
  • I’m unsure if this would provide enough support over time.

2. Mount a wooden beam across the wall studs:

  • Secure a long piece of wood (mounting board) to the wall by screwing it into all available studs.
  • Then, attach the TV units to the mounting board.
  • The downside is that it might not look great from the sides due to the visible gap under the board, but I could add extra wood pieces to make it look flush.

2. Use a dovetail mounting system:

  • Install one part of the dovetail bracket on the wall and the other on the TV unit.
  • This would allow the TV units to be hung securely onto the wall-mounted bracket.
  • However, I’m less familiar with this method and whether it’s suitable for this setup.

So Im looking guidance on the below.

  • Which of these approaches would you recommend?
  • Are there specific types of anchors or hardware that would work best for the hollow wall mounting?
  • Any tips for making the wood mounting board solution look more polished if I go that route?Screenshot 2024-12-23 at 2.53.52 pm.pngScreenshot 2024-12-23 at 3.10.10 pm.png

I’d appreciate any insights or suggestions from those who’ve dealt with similar projects. Thanks in advance!

Why join the Bunnings Workshop community?

Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects