Finishing edges of laminated floor boards?

[Raj3]

  

Hi there,

requesting help with doing laminated floor boards. Kind of stuck with the edges. Please advise how to proceed.

 

[Jason]

@Raj3,

Apologies for the unusually slow reply. Usually @MitchellMc would be on hand to promptly assist with a question like this but our resident Bunnings D.I.Y. expert is taking a well-earned break at the moment and will be back next week. 

Have you seen the Bunnings step-by-step D.I.Y. advice How to lay laminate flooring? I will also add the video below. It includes how to cut the boards for corners and measure for a rip - cutting the laminate flooring lengthwise instead of width-wise, to fit in a small gap between a board and the wall. It also includes how to use quad when there is a gap between the boards and the skirting board. 

Have a good look and let us know if you have follow-up questions. We're here to help.

Welcome to the Bunnings Workshop community and please don't hesitate to post anytime you need a hand. 

Jason

 

[MitchellMc]

Hi @Raj3,

I just thought I'd check-in to see how your project is progressing and if you have questions after watching the guide @Jason supplied.

Please let me know if you need further help.

Mitchell