Share
We had been on the hunt for new bar stools for a while and decided we would start looking on Gumtree and FB Marketplace for some unwanted ones we could refurbish. We found 4 bar stools from a restaurant turning into an ice cream shop and got 4 at $10 each. It was a pretty simple facelift for these stools!
How we did it:
- Take off wooden seats
- Lightly sand the metal base
- Spray metal base with Topcoat for metal - we used Dy-Mark 300g White High Gloss MetalPro Quick Dry - Bunnings Australia
- Sand the seats with a course then fine sand paper - we used an old Ozito detail sander similar to this one Ozito PXC 18V Detail Sander - Skin Only - Bunnings Australia
- Apply varnish to seats - we decided to keep the light colour of the timber as is and give it a hint of shine with Bondall 250ml Satin Monocel Clear Timber Varnish - Bunnings Australia
TIP: DO NOT USE OLD CLEAR GLOSS! We thought we would finish up an old tin of clear gloss for the seats... bad idea it left
white dots on the seats and it was sticky to the touch after drying. We ended up having to re-sand the seats - luckily we only did 2.
Pretty happy with the result!
Hi @Tinker_Bell
Thank you so much for sharing your project photos and materials list. It's great that you've found yourself a good stool set. The stools look beautifully refreshed. How many days did it take to paint the entire set? Did it include the table or was the table already in your possession? Thank you for sharing that tip about not mixing clear finishes. If you have another project lined up, please don't hesitate to share them.
We look forward to seeing your next project.
Eric
