Share
Good Afternoon @AnnieOzi
I had a quick look at how to videos as the hinge you have choosen needs to be recessed. I found this video on how to mount that type of hinge
Ive also include a link on adjust the doors as I always have trouble remembering how to 
Hope these help. Id be cautious when you are drilling the recessed hole but the video is using a jig so that would limit the depth.
Dave
Hi @AnnieOzi
Welcome to the Bunnings Workshop community. It's wonderful to have you join us, and thank you for sharing your question about installing Kaboodle hinges.
It's great that you've received excellent advice from @Dave-1. Just to add to the suggestions made, I recommend using Kreg Concealed Hinge Jig or Hafele Hinge Mounting Kit. Both cutting jigs have guides included with them, but it is best to follow the cutting instructions for the type of hinge you purchase.
If you can tell us the model number of the hinge you'll be purchasing, we'll be more than happy to locate the mounting instructions for you.
If you have any other questions we can help with, please let us know.
Eric
Hello @AnnieOzi
Thank you for your patience. The Kaboodle technical team has sent me the following measurements. From the top of the cabinet door to the center of round hinge cutout is 134.5mm. The same distance is applied to the bottom hinge from the bottom of the door. The center cut out is 22.5mm from the side edge of the door. The cut out is 12mm deep and is 35mm in diameter.
I've done some measurements at the store and have sketched them up for you to look at. I suggest doing a test fitting on off cut timber to get a feel on how the hinge is supposed to fit. Please keep in mind that the hinges have adjustment features integrated into it, hence I don't recommend changing the recommended drilling points.
If you've purchased the Hafele Hinge mounting kit, you'll notice that it has a guide plate included with it. I suggest using it when you try out your test fitting on the off cut timber.
If you have any other questions we can help with, please let us know.
Eric
Thanks so much, Eric. I'll go and buy hinges and Hafele mounting kit tomorrow. I notice the Hafele download diagram mentions centrepoint/centre cut out is 23.3 from edge of door compared to your 22.5.
As you say there is adjustment on cabinet side.
You've given me the confidence to tackle the kitchen cabinet now. I might also tackle laundry one as well! But..... after I make my flyscreens! Bought all the parts - framing, corners, spline, mesh, mitre box and hacksaw. Thank goodness for Bunnings!
