I have painted a couple of rooms in my house using Dulux Wash and Wear – Lexicon (full strength). Once the 2 coats dried, my rooms have come up looking blue in certain lights and especially against the white ceilings.
I wanted a white that had a tinge of grey in it, which is what the sample card looked like. Not blue. Was thinking of using Lexicon quarter instead but I’m still worried that blue will come through.
Does anyone else have experience of their walls looking blue? Or using the Lexicon colour?
It's probably a cool white as opposed to a warm white.
Rather than repainting, you could try using a different lightglobe. Try ones with a warm light rather than a cool white. And how much natural light do you get? How does it look in natural light?
My walls are Dulux Natural White and they have a grey tone to them.
Haven't had the issue of blue walls, but I would try a different light globe to see if it helps!
Another idea is to speak to a Dulux Colour Consultant. You can book them through Bunnings @Ajmod.
What kind of house do you have?
Cooler whites tend to suit more modern or contemporary spaces which have plenty of natural light, whereas the creams or yellowish whites often lend themselves more traditional properties that might have smaller windows and less natural light.
Dulux Lexicon Quarter is one of the whitest whites around if that's what you're after.
Thanks everyone! Our house is a 70s home that we're in the process of renovating. The main living spaces are large and get lots of natural light, but bedrooms and bathrooms are on the small side. The walls are currently painted a dark cream colour.
So far, we have painted an ensuite, bathroom and small bedroom. The bedroom has a large window but the ensuite and bathrooms don’t get much natural light.
It doesn’t look as blue when in daylight (more light grey, instead of a white).
Thanks for the globe suggestion! We’ll have LED downlights throughout the house so I’ll make sure to buy warm light globes. This might save us repainting those rooms.
The rest of the house gets quite a bit of natural light but we’re still worried to keep painting with Lexicon.
I only have a photo of the paint going on (Lexicon full strength). The blue is more noticeable once it dried and had 2 coats applied.
.
My sister had a similiar issue when she installed white pressed metal sheets as a splashback in her renovated kitchen. The pressed metal is a great look but the white does throw a light tone of blue up and seems to be a bit more noticeable against the cream cupboards they've used below. Still looks good and they're happy with the result!
Hi There,
For new people looking for information on this. My walls turned almost baby blue when we first painted our rooms. My partner almost had a heart attack! (I kinda lowkey liked it though). Quickly i realized the older grey/blue carpet was reflecting and throwing off the wall color. Once we ripped up the carpet and polished the floor boards it looked closer to what we Expected.
Many thanks for joining in the discussion and sharing your experience @RufioXC. We are looking forward to reading more about your projects and plans. Please don't hesitate to post whenever you have something to share with other members.
Welcome to the Bunnings Workshop community. We're really pleased to have you join us and trust that you'll get plenty of helpful information, advice and inspiration in return.
Thanks again,
Jason
I have just painted all the interiors in Lexicon full strength but some wall look like a baby blue colour. The sample pot which I tried out did not show any blue. Don’t really like it so may have to paint over the wall again with vivid white but it’s another cost.
bit disappointing.
Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects
We would love to help with your project.
Join the Bunnings Workshop community today to ask questions and get advice.