Workshop
Ask a question

The Bunnings Workshop community can help with your home improvement projects.

Lawn renovation

homeinmelbourne
Becoming a Leader

Lawn renovation

Lawn Renovation - Home in Melbourne.png

 

Over the Winter, we noticed our lawn had become overtaken by clover, weeds and overall wasn’t looking as green or healthy as it was last Summer. We researched for about a month before starting any work and invested in tools and supplies we needed to bring our lawn back for Spring.

 

Note: We have a Kikuyu lawn so the methods and products used may not be suitable depending on your lawn/grass type.

 

BEFORE AND AFTER:

 

Before & After Lawn RenovationBefore & After Lawn Renovation

 

Before & After Lawn RenovationBefore & After Lawn Renovation

 

 

Here’s how we tackled our lawn renovation:

 

Step 1: Identifying the issues with the lawn

 

  • Thick and dense lawn from thatch build up (leaf to soil level was 4+ inches in some areas);
  • African Black Beetle and larvae infestation;
  • Clover and broadleaf weeds throughout.

 

Our unhealthy lawn - mostly thatch, dead material and beetle larvae damageOur unhealthy lawn - mostly thatch, dead material and beetle larvae damage

 

Our unhealthy lawn - mostly thatch, dead material and beetle larvae damageOur unhealthy lawn - mostly thatch, dead material and beetle larvae damage

 

End of Winter - White Clover, Poa Annua, Paspalum and Ryegrass weedsEnd of Winter - White Clover, Poa Annua, Paspalum and Ryegrass weeds

 

Step 2: Treating for weeds and clover

 

We used the Saxon Patio Weeder to manually pull all the broadleaf weeds (Thistle, Plantain Weed, Dandelion Weed, Cudweed). Generally they are easy to identify - round in growth habit and some are hairy/prickly.

 

Manually removed broadleaf weedsManually removed broadleaf weeds

 

We then sprayed all the whole lawn to target any remaining weeds in particular - White Clover Weed. We used Yates Bindii and Clover Lawn Weedkiller Concentrate and mixed the concentrate in a sprayer bottle

 

Note: We avoided spraying for a few days either side of mowing to allow the lawn to recover from the mow before spraying with weedkiller and a few days after to allow the weeds to fully absorb the weed killer product.

 

 

Step 3: Scalping the lawn

 

With a lawn as thick as ours, we had to gradually reduce the cut height over a few weekends leading up to the actual lawn renovation. It would have been difficult to scalp the thick lawn resulting in choking out the rotary mower. 

 

Scalping: We set our mower to the lowest height setting and went over the lawns twice. We had to stop often to empty the catcher because of how much thatch and clippings were being collected. I wouldn't suggest doing this with a battery-operated mower as this process requires you to essentially cut down the entire lawn to almost soil level.

 

A couple of weeks prior to lawn renovation - gradually reducing mow height so that there is less to scalp. Still plenty of clover weeds at this stageA couple of weeks prior to lawn renovation - gradually reducing mow height so that there is less to scalp. Still plenty of clover weeds at this stage

 

Pre-scalp: Clover has been treated and died off.Pre-scalp: Clover has been treated and died off.

 

IMG_2959.png

 

Scalped lawn - stolons and soil now visibleScalped lawn - stolons and soil now visible

 

Dead material collected from the scalping processDead material collected from the scalping process

 

 

Step 4: Scarifying the lawn

 

We purchased a Ryobi Scarifier and a couple of 5.0Ah batteries for the scarifying process. The scarifier has stainless steel blades that cut through and remove the thatch and dead material in the lawn. By removing the dead layer of grass that sits on the soil, it allows for more water, air and nutrients to reach the grass roots.

 

IMG_3120.png

 

We went over the lawns twice in different directions and didn’t use the catcher that came with the scarifier. Instead, we picked up the dead material with the rotary mower. We ended up removing over 1 trailer load of thatch from the two front lawn areas!

 

IMG_3121.png

 

IMG_3122.png

 

IMG_3123.png

 

Picked up all the dead material left behind by the scarifier using the rotary mower. There was so much that we had to keep emptying the catcher every few metres.Picked up all the dead material left behind by the scarifier using the rotary mower. There was so much that we had to keep emptying the catcher every few metres.

 

While it may look like we’ve decimated the lawn and there’s nothing left of it, in contrast we’ve only removed all the thatch and dead material to allow the lawn to breathe again. The grass solons/runners still remain within the lawn and will eventually grow and spread out as the lawn recovers. Now that much of the soil is exposed, it will allow for light, air and nutrients to reach the grass roots.

 

Post-scarification: Plenty of soil exposure, minimal dead material left behind and low cut height achieved.Post-scarification: Plenty of soil exposure, minimal dead material left behind and low cut height achieved.

 

Step 5: Fertilising

 

We had half a bag of Neutrog Sudden Impact Lawn Fertiliser leftover from last season so we used this slow-release granular fertiliser after scarifying and generously watered it in. This product worked really well for us last year and isn’t as expensive as other lawn fertilisers. It would probably be beneficial to also water in with Seasol or a liquid fertiliser but we didn't have some on-hand at the time.

 

Spread granular fertiliser ready to be wateredSpread granular fertiliser ready to be watered

 

Fertiliser applied and ready for wateringFertiliser applied and ready for watering

 

Neutrog Sudden Impact Fertiliser used post-lawn renovationNeutrog Sudden Impact Fertiliser used post-lawn renovation

 

Step 6 (Week 1): Treating for lawn beetle and larvae

 

We noticed a lot of magpie activity on the lawn as they would feast on the worms and black beetles. We waited for a rainy day and just before the rains came, we sprinkled a couple of bottles of Richgro Lawn Beetle and Grub Killa Insecticide and if we notice more insect damage throughout the season, will reapply as needed. 

 

Week 1 Recovery: 

 

WEEK 1 RECOVERYWEEK 1 RECOVERY

 

WEEK 1 RECOVERYWEEK 1 RECOVERY

 

WEEK 1 RECOVERYWEEK 1 RECOVERY

 

WEEK 1 RECOVERYWEEK 1 RECOVERY

 

 

Step 7 (Week 2): Core-aeration and levelling with sand

 

After 2 weeks the lawn was starting to recover and fill in but there were still some low spots and dips. So before spreading sand, to level out these areas, we manually core-aerated the lawn. We used the Cyclone Lawn Aerator but struggled to get decent cores as the soil was surprisingly not compacted. 

 

IMG_3155.png

 

Manually core-aeratingManually core-aerating

 

Levelling/top dressing the low spots in the lawn with sandLevelling/top dressing the low spots in the lawn with sand

 

The lawn after levelling with sandThe lawn after levelling with sand

 

Week 2 Recovery:

 

Week 2 Recovery - photo before applying the sand to low spotsWeek 2 Recovery - photo before applying the sand to low spots

 

We purchased the Ryobi Edger to create the sharp edges. 

Week 2 Recovery - photo before applying the sand to low spots.Week 2 Recovery - photo before applying the sand to low spots.

 

 

Step 8: Recovery after lawn renovation

 

We kept the lawn well-watered, continued to hand pull any weeds that emerged. We mow every 3-4 days to keep the ryegrass down (we still have remnants of other grasses within the Kikuyu from scattering off-the-shelf lawn seed last year). We might have to apply a lawn growth regulator to slow down the growth so we don’t have to mow so often. 

 

To create the stripes, we purchased a (now discontinued) Ryobi cylinder mower and modified it by adding a weighted roller on the back. We spent some time taking it apart and backlapping the cylinder mower with backlapping paste. Backlapping maintains the sharpness of the blades for a sharp scissor-like cut. 

 

IMG_3048.png

 

IMG_3047.png

 

 

Week 3 Recovery:

 

Week 3 Recovery: Some areas with sand still visible where the grass has yet to fill in.Week 3 Recovery: Some areas with sand still visible where the grass has yet to fill in.

 

Week 3 Recovery: Overall filling in nicely with some sandy spots needing a little longer to fill inWeek 3 Recovery: Overall filling in nicely with some sandy spots needing a little longer to fill in

 

 

Week 4 Recovery:

 

4 weeks after doing the lawn renovation, it has almost fully recovered. There are still some areas which need to thicken out a bit but overall, happy with the recovery after 4 weeks.

 

In the process of planning for this lawn renovation, we discovered a brick garden bed edge (photo below) that was concealed under the old thick lawn! The side garden bed is still a work in progress while we continue to planting it out. 

 

Week 4 RecoveryWeek 4 Recovery

 

Week 4 RecoveryWeek 4 Recovery

 

Lawn Renovation photo collage - Home in Melbourne.png

 

Tips/Lessons learnt:

  • Treat weeds and apply a beetle insecticide before they overtake and decimate the lawn;
  • Avoid using off-the-shelf lawn seed unless the grass seed is the same as what is in your existing lawn. Otherwise you’ll end up with a mix of different grasses in your lawn;
  • Renovate lawn in the growing season (34°C Rule: Add your low and high degree temperature and if it’s above 34°C consistently, then it’s warm enough to do a lawn renovation);
  • For stripes, we purchased a reel mower and modified/added a weighted roller on the back. Alternatively, you can roll over and create the stripes using a water filled roller. 
  • (For Kikuyu lawns) Maintain a low mowing height and mow often to avoid thatch build up. We made the mistake of mowing higher in the Summer months to maintain a green-looking lawn which resulted in creating a thick, dense and unhealthy lawn.
RenoRach1
Making a Splash

Re: Lawn Renovation

Magnificent work and what a result!  Thank you for the really detailed explanations and photographs - they'll be very helpful my lawn-boy this summer, aka husband! Congratulations on your emerald-green lawn.

MitchellMc
Bunnings Team Member
Bunnings Team Member

Re: Lawn renovation

Amazing results @homeinmelbourne! Your lawn must now be the envy of all your neighbours. I trust our members will really appreciate the amount of detail you've included in this post, as it will be a fantastic reference for anyone wishing to improve their lawn. 

 

Could you tell us a little more about the weight you used on the rotary mower to create the striped effect? Is that a homemade PVC weight-filled roller I see in one of the images?

 

Many thanks for sharing.

 

Mitchell

 

See something interesting? Give it the thumbs up!
Bullswool
Finding My Feet

Re: Lawn renovation

Fantastic stuff, great post mate!!

EricL
Bunnings Team Member
Bunnings Team Member

Re: Lawn renovation

Hello @Bullswool

 

Welcome to the Bunnings Workshop community. Thank you for joining the discussion.

 

Let me tag @homeinmelbourne to make them aware of your kind words. I totally agree that this is an awesome effort in turf revival. I actually have a similar cylinder mower and it gives the turf such a great cut. If you're attempting a similar project, please make sure to post an update. I'm sure our members would be keen to see your version of a turf rescue.

 

Eric

 

See something interesting? Give it the thumbs up!
Remarka6le
Amassing an Audience

Re: Lawn renovation

Lawn looks fantastic @homeinmelbourne , we got the  Ryobi Scarifier after winning a Ryobi comp last year and loved the results we got from it, look's like y ou got the same results! We also used a petrol lawn corer that we borrowed as well, made life quick and easy getting those cores out, might be useful in the future? Well done on everything! 

 

 

Remarka6le

Re: Lawn Renovation

Thank you very much @RenoRach1 !

Re: Lawn renovation

Thank you @MitchellMc ! 

 

Yes it's a homemade PVC weight-filled roller. I try to mow double width stripes so it takes two passes across the lawns. It can be difficult to see which direction the grass blades are facing so sometimes I go over the wrong line and the stripe gets less defined. 😅

 

IMG_4442.png

 

IMG_4437.png

 

Re: Lawn renovation

Thanks @Remarka6le ! That's an awesome prize! Congrats!

Dave-1
Community Megastar

Re: Lawn renovation

@homeinmelbourne 

So impressed with the effort you have put in! It looks great and love how you have documented the whole task. Not sure I would even attempt it but have always wanted to know how to do so.

Thank you

 

Dave

Why join the Bunnings Workshop community?

Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects