- Subscribe to RSS Feed
- Mark as New
- Mark as Read
- Bookmark
- Subscribe
- Printer Friendly Page
- Report Inappropriate Content
This panelled feature wall greatly enlivens a teenager's bedroom.
The project
Tired of seeing evidence of a little boy living within these walls for years, l thought what better way to bring in my son's teenage years than to give him a new room that should see him into adulthood?
l had seen examples of panelled feature walls and thought that with Bunnings FJ panels l could definitely give it a go.
I drew up my design on paper and on the wall. I measured every length of timber and angle and for the first time l learned to cut, glue and apply every piece.
It all came together when l painted it. The difference it made for such an affordable price was fantastic. I have since done three more rooms in different designs.
My son absolutely loved it, as did my second son, who has since had his wall transformed too.
The project took a week or so, with the time being put mostly into the design and the transfer of the design to the wall. To get the angles and cuts right, I measured twice so l could cut once.
I used Bunnings primed FJ Pine 42mm x11mm in lengths of 2.7m. I learned after my first wall that by drawing it on the wall and adding measurements together l could use offcuts rather than buying full lengths for every line and having a lot left over.
The two rooms are different colours. The first is Dulux Flooded Gum; the second was a mix l made using Dulux Silver Tea Set as a base colour. I like to mix my own colours – if l need to get more l take a sample back to Bunnings and have a colour match done.
How to make a feature wall with wood panels
A feature wall can add interest and create a focal point for a room or entryway. Check out our step-by-step video guide How to make a feature wall using wood panels.
More project inspiration for your home
Bunnings Workshop member kileycarbin transformed an entryway into a brighter and more welcoming space with wainscoting and wallpaper.
Workshop member Sooze created this incredible feature wall in their hallway using Pine, an Ozito nail gun and paint.
Workshop member sjloves found an easy and inexpensive way to create a feature of her pantry doors with skirting boards.
Let us know if you need a hand with your project – we're here to help.
- Mark as Read
- Mark as New
- Bookmark
- Highlight
- Report Inappropriate Content
Well done that look fantastic, you definitely have given me some inspiration!
- Mark as Read
- Mark as New
- Bookmark
- Highlight
- Report Inappropriate Content
This is an inspiration for one of my bedrooms. Did you use only liquid nails or also real nails?

- Mark as Read
- Mark as New
- Bookmark
- Highlight
- Report Inappropriate Content
Hi @razzreddy,
A warm welcome to the Bunnings Workshop community and thank you for your question.
Please allow me to tag @sianlouise so she is notified of your question.
Wainscoting will typically use a combination of liquid nails and brad nails, but this is not always possible. When it is not possible, liquid nails alone is usually fine.
Let me know if there is anything else I can assist with.
Jacob
- Mark as Read
- Mark as New
- Bookmark
- Highlight
- Report Inappropriate Content
@razzreddy I used liquid nails ..
painters tape held them in place for a few hours just to stop any possible movement from happening
years later everything is still in place & been repainted.. cause why not
Why join the Bunnings Workshop community?
Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects
Subject | Author | Started | |
---|---|---|---|
a month ago | |||
September 2021 | |||
October | |||
November | |||
August 2023 |