Workshop
Ask a question

The Bunnings Workshop community can help with your home improvement projects.

Kitchen refresh using White Knight Renew

NikkiMaree
Building a Reputation
NikkiMaree
NikkiMaree
Building a Reputation

Refreshing these timber-look laminate cabinets, utility panels and subway tiles was simple with White Knight Renew Tile and Laminate Paint.

 

 

F1C08777-9712-41BC-8794-6E48E7D499EB.jpeg

 

The project

 

I absolutely hated the timber-look laminate and green tiled splashback in our kitchen. Using a few cans of White Knight Renew Tile and Laminate Paint, I painted the hardwood utility panels and white subway tiles and now have a bright, fresh new kitchen. 

 

I painted the cabinet doors while they were still hanging as I just don’t have the space to paint them while off. I used one coat of primer after a good clean, and two coats of White Knight Renew using a 4mm microfibre roller, plus a brush for cutting in. It's a navy blue similar to the Taubmans colour Admiralty. I also did a light sand of the cabinet doors between coats as well.

 

We used 2400mm x 900mm hardwood laminated panels for the benchtops. My husband cut holes for the sink and stove, and I applied three coats of Cabot's Satin Clear Benchtop Timber Finish.

Cost breakdown:

  • Paint was about $200 all up. 
  • Tiles were $18 a box, and we used two boxes. 
  • Benchtops were the most expensive at $179 each.

The total cost came to just under $1000.

 

Before and after

 

before.jpeg

 

F1C08777-9712-41BC-8794-6E48E7D499EB.jpeg

 

More kitchen renovations

 

Workshop member Rufaro brightened his beige and brown kitchen by painting his tiled splashback and cupboards a brilliant white and switching the handles to a sleek brushed gold.

 

StevieB_0-1625227002569.jpeg

 

By removing the cabinetry doors and drawers and painting them a clean white, Workshop member Pete was able to stay on budget for this $10,000 kitchen makeover.

 

StevieB_1-1625227016087.jpeg

 

More kitchen ideas can be found at our Top 10 most popular kitchen renovation projects.

Comments
Manzie
Just Starting Out

HELP! 
I've just seen a drip mark (after 1st coat of colour).  
Can I lightly sand between coats? Eeik 

EricL
Bunnings Team Member
Bunnings Team Member

Hello @Manzie 

 

Welcome to the Bunnings Workshop community. It's sensational to have you join us.

 

Yes, you can sand between coats. But you'll need to wait for the first coat to totally dry off before you sand the surface where the drip occurred. I recommend a 400grit sandpaper and sanding lightly so that you don't go too deep into the first coat.

 

If you need further assistance, please let us know.

 

Eric

 

Why join the Bunnings Workshop community?

Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects