Bathroom and Laundry

We are renovating a hardword timber house and have gutted the bathroom. There was cememt sheet tile underlay, under the tiles originally. Should i jus ...

This was a 1970's bathroom that needed upgrading. We started by painting the walls a navy blue and the cabinet to match in a gloss navy blue. As we l ...

 I have tried a strap wrench but can't seem to get the grip on the angled tap housing

I try to drill a hole on a door for a door lock. I bought a hole saw from Bunnings. When I drilled, the pilot drill bit was rotating which is good. Bu ...

As per title - how do I fix the heat on my taps? To get it hot - hot tap has to be at full tilt/100% and cold is almost off. Pressure is ok. Just repl ...

My problematic tap in a place I recently bought has finally stopped turning even without a wrench, which means I can’t access cold water and since I c ...

Hi all, My wall mount of towel rail is broken. Any glue recommendation for a metal to metal glue to fix this? Thanks Ben

It's not uncommon for the stub on the fixing plate for bath/hand towels fixing plates to break off. Unfortunately there are no spare parts available a ...

Hello, my vanity top has started to bubble and separate from the base around the sink, due to water damage from the gap around the tap. How can I fix ...

My wife loves doing the laundry (Yes i know ............................) so I decided to make her happy place even happier  I used all Bunnings pro ...

Hi ThereCaroma cistern makes a flushing sound for 3-4 seconds after every hour or so,no obvious water leaking in the pan around or under the toilet.Is ...