The Bunnings Workshop community can help with your home improvement projects.
Basically what has happened, is that one of our showers isn't providing the same quality water pressure it usually does. our other shower and all other taps are fine with pressure just except the one shower. we have tried putting on a new shower head (didn't fix the issue), we have had a plumber look at it to although he only really looked behind at the filter which had some dirt and little bit of build up but again that didn't fix anything. We are suspecting it is likely the shower mixer and think we may need to swap out the cartridge. We are on tank water so our pressure is usually way stronger with that compared to mains anyway. Any Help would be greatly appreciated.
Hi @Belle_H
I think you are on the right track re shower mixer test take it out and see what happens to the pressure.
Well I an guessing you arnt using any line filters. So whats left a kinked or squashed pipe? Another in line shut of tap for the bathroom?
I have seen plumbers tap when used on a tap draped across the pipe hole by mistake and reducing the flow by half as a remote possibility.
Wont hurt to take the mixer out and flush the line a bit.
We have a rain event and dirty in the water we called the water mob they flushed the street line but we have to do our own property lines. Ie run the taps with the filteers out. The dirt was bad but it didnt stop the waterflow in any way.
Sorry the plumber not more helpfull.
Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects
We would love to help with your project.
Join the Bunnings Workshop community today to ask questions and get advice.