Afternoon @Reuben
One way to mount the type of privacy screen you are wanting is to mount some Upside down U styled brackets that fit over the hand r ...
Morning @perthian
I do not know, I would be presuming so, I generally read the back of the packet to see if they are suitable (yeah I spend a lot of ...
Morning @ludicrousgib
hahahah yeah the lawn is reclaiming the concrete
I would pressure wash the lot (top and bottom), you will have paint flakes pe ...
Morning @Siobhan7
It pretty much comes down to what you want and how much you want to push for it. Sometimes we dont feel like we want the headache. ...
Morning @perthian
I just had a search on the Bunnings site and came up with these as an example
Zenith 12G x 50mm Galvanised Dome Washer Head Roof S ...
Morning @Elljames
@EricL has pointed out the steps I would be following as well. With the legs being so close to the broken section I would have a cl ...
Good Morning @danmonde
Like @EricL I have seen the process for lifting and releavling concrete slabs. I have not come across anything that could be i ...
Thanks, everyone!
I took your advice and scrapped my original idea. I hadn't even considered covering the trench with soil as an option! I completel ...
Hi @phiaxs,
It's a bit hard to diagnose the issue from the images. I can see the ceiling board and then a thin, deteriorated board that's cracking a ...
It's great to see that @Dave-1 has already provided some advice @ludicrousgib. I'd suggest scraping off the roots, scrubbing down the area to remove d ...
Thanks @Dave-1 and @EricL. Here's a pic.
I think your questions have helped answer mine. Not sure what it looked like before the coping stones were ...
Thanks, for the advice. It was supposed to be a pool area but never eventuated. We are now slowly cutting it all out..It does hold water so, I'll sort ...
Hello @Boze
Welcome to the Bunnings Workshop community. It's wonderful to have you join us, and thanks for sharing your question about your vermicu ...
Hello @happy_bay
Welcome to the Bunnings Workshop community. It's sensational to have you join us and thanks for sharing your question about your c ...
Afternoon @Reuben
One way to mount the type of privacy screen you are wanting is to mount some Upside down U styled brackets that fit over the hand r ...
Morning @ludicrousgib
hahahah yeah the lawn is reclaiming the concrete
I would pressure wash the lot (top and bottom), you will have paint flakes pe ...
Morning @perthian
I just had a search on the Bunnings site and came up with these as an example
Zenith 12G x 50mm Galvanised Dome Washer Head Roof S ...
Morning @Elljames
@EricL has pointed out the steps I would be following as well. With the legs being so close to the broken section I would have a cl ...
Good Morning @danmonde
Like @EricL I have seen the process for lifting and releavling concrete slabs. I have not come across anything that could be i ...
Morning @muzza1
Nice plans and I cant see any issue with what you have chosen
The only quyestion I have is with this-
Planning to do a picture fram ...
Morning @happy_bay
I can think of two options both are not great.
The first is the one I prefer. And that is to get a builder to come out and cut the ...
Morning @Boze
Repairing the manhole cover as @EricL has suggested would be the easiest way to go, tho the crack will still be able to be seen.
Id ac ...
Its that time of year when we all start to want to hang out on our decking only to frown at the state it is in... Well yeah I did So I have rolled th ...
My pool deck had had no love shown to it for 9 years I would say, I had oiled it twice? Maybe three times around 6 months after I built it in 2011 but ...
I have just been wondering what is a mistake you have done with a tool. There have been a few new members concerned, maybe about using a tool or maybe ...
The old patio had three plus layers of various paint over it. Bringing it back to something nicer started from renovating the front door and has flowe ...