Hi- I’m attaching a wooden base to a vintage metal table lamp.I’ve inserted a screw thru the wooden base and into the central column of the lamp, but ...
Not sure what this isI think the round thing is the starter.Google suggest to me this is a Magnetic-type ballastWhole imageTakes a while to turn on, f ...
Hi all, I would really appreciate any advice on fixing a crack in my bedroom door. It’s quite large, and I’d like to repair it in a way that makes it ...
I need to put a support piece of timber on an internal brick wall to bridge the gap between the wall and the supporting brackets of the stand. (See p ...
Hi all,
I have a internal structural steel post in a new house which was previously exposed to the rain as there was several months of delay in instal ...
Hello, champions,
I was painting the wall, and due to a little pressure from the roller, that hole emerged (pictures are attached). The sheet behind ...
Hi,
Apologies if this is not an appropriate question for this forum but I just wanted to ask if anyone knows what is causing this bubbling on top of ...
hey everyone,
im hoping someone can help me with finding a latch, very strong magnet or a lock of some sort that would perfectly fit in the little ga ...
I purchased a Nelson 22W 185mm T5 Natural White Tri-Phosphor Circular Fluorescent Tube to replace the old one, but it didn’t light up at all. The prev ...
I have tried to fix the mold in the ceiling of my bedroom using the natural green goo. No improvements. The leaking pipes have been fixed but I still ...
one of the sliding doors on my wardrobe is stuck looks like the wheel in the base has come off. I tried to fix by inserting it back and not sure if it ...
Hell everyone,
I've got this black marks on the bedroom ceiling. Looks like it happened over a period of time (not overnight). I've asked roofer to ...
The caulking/sealant has a lot of gaps/has come off the window frame in a lot of places in my apartment.
Any suggestions for a fix?
pictures attache ...
I have floorboards with big gaps between that link outside with inside. What's the best way to fill the gaps and then use boards as floor base and kee ...
Hi, looking to repair a hole where there was a ac controller. I still need to remove the wall anchors from the gyprock which I assume I can plaster ov ...