Topics with Label: Building and Construction

I recently purchased the holesaw set as recommended by Bunnings staff for drilling a hole in a timber desk. I turned the torque up high but the drill ...

I have 4x 1mm shims because I drilled a bracket too low for my floating shelf. Would the shim stack be better positioned away from the drill hole so i ...

Hi All,Very new to DIY but looking to make a bench seat in our living room and planning to use a strong frame made out of 90mm by 45mm pine. I was pla ...

 I am drilling into a metal stud and noticed I've made two dents. Should I keep going? The hole is 10mm for a 4.5mm screw (I am aware that is too big ...

I had some white melamine board left over from another project, my grandson asked if I could make him a bookshelf for his place, I ended up making two ...

I want to build a solid magnetic chalkboard/blackboard for my toddler using some sort of metal sheet. I want to install it on the living room wall so ...

Hi guys I need to build frame for a canvas painting with following measurement. how do we build costume frame? 658 x 1265

 I would like to attempt this framing for my wall. What timber do you suggest I use?

Dear Community, I have made my first every DIY table, with Merbau 220X60X2.6cm as tabletop, Merbau 4.2X4.2cm as legs, using metal mounting plate to ...

Hi everyone,I’m setting up my desk and could really use your advice on the best way to position the legs. Here’s what I’m working with:Desk Top:- Size ...

Hi All This can be my first DIY Bunning project. I would like to make a wooden stain type barn door. Size of opening is width 980 mm width and heig ...

Hi, I am planning to build a nib wall on the back wall of our bedroom. Currently the room is carpeted, what do I do with the carpet? I plan to remove ...

Hi all. Long time reader first time poster, bit stumped in my latest project, I want to fit two doors to an open living room. House is double brick, i ...

Hi everyone, I recently came across the SpecRite Acacia Golden Panel (1800 x 600 x 18mm) at Bunnings and thought it would make a great tabletop for ...