Topics with Label: Tools and Materials

We have just removed our old kitchen. There is a concrete slab under the old stove that sits 12mm higher than the rest of the wooden floor. The slab w ...

Hi Everyone I recently brought an apartment and moved in last week. I need to replace the grease filter for the rangehood and it appears damaged. Lo ...

Hello! I am in the process of making/ installing a cabinet above my fridge - today when removing the cornice I found this bracing ply behind the gyp ...

what is the best to coat a laser etching on a plywood board please  

Hello, my kitchen tap had a piece break off at the bottom of the tap. How do I fix it please?    

Anyone know where I can get a replacement for one of my draws? You will see in the photo that the top draw is different to the others. I want them all ...

Hello all. DIY newcomer here. Looking to change the under sink valve so I can have a dual connection for both the cold water tap, and a dishwasher. ...

What can I do to revamp kitchen bench tops without replacing them? I want to cover the top and the wood sides. What could I do?    

So when i moved into my house in 2020 the oven door seal appeared to be cactus so i have never really used it as i’m not that handy and it’s just been ...

I have pulled out my kitchen and just removed all of the splashback tiles. My question is I’m not sure what I do now to the wall behind the oven insta ...

     Hi, we had in the past a big tall cupboard. We removed the top cabinets and only left the cabinets at the bottom, Now , we need a top so look ...

Our current cooktop Omega OC65TA cracked today. Looking for a replacement of similar type. Current cooktop is hard-wired and Is placed on a ceasor st ...

   Hi, we have recently had crickets enter Our house and it’s been soo annoying since I’ve got a baby. how can I fix this? I’m scared to spray the h ...

I need to replace the hinges on one of the kitchen cabinets .The old hinges used screws that were pretty big due to which there are these two big hole ...

Hey guys just wondering if theres an easy fix for this problem instead of taking the whole thing apart. I was also wondering is there meant to be some ...

Hi guys could someone suggest me that what could possible done to repair the burnt patch of kitchen bench top. i have been quoted more that $2500 To r ...

Hi all, I was wondering if anyone has advice on how I might go about undoing a really stubborn tap and faucet. The bottom collar on the tap on th ...