- Subscribe to RSS Feed
- Mark as New
- Mark as Read
- Bookmark
- Subscribe
- Printer Friendly Page
- Report Inappropriate Content
A nest of three tables made from Tasmanian Oak offcuts.
The project
I had these small off-cut timber boards that were destined for firewood. I was going to make chopping boards out of them, however, I wasn’t sure of the type of glue was used to laminate them together, so I decide to make this set of planter stands. I got the idea from the internet. I used Tasmanian Oak. This project took me six days to complete.
Steps
Step 1
Cut angles on each board on a saw table.
Step 2
Glue up and clamp together for two of the stands. For the third stand I used superglue with a spray accelerator and the wood glue. This worked well: no clamping required.
No clamps used for this one, just super glue and wood glue.
Step 3
Make up spline jig and cut and glue splines.
Step 4
Sand and paint. I used water based clear varnish, applied with a piece off cut sponge (no brush marks).
Tools and materials
Materials used in the project:
- Offcuts of stair treads, Tasmanian Oak
- 12mm x 40mm Tasmanian Oak for splines
- Water-based clear satin varnish
- Sandpaper (various grit)
- Super glue.
Tools used in the project:
More inspiration for side table projects
Bunnings Workshop community member Sam made a timber side table that won best small project in our 2023 search for Australia's best D.I.Y. projects.
Community member Liesel created an hourglass side table by joining two pots and spreading a thick mixture of grout and paint.
Get more inspiration from our Top 10 most popular indoor furniture projects.
- Mark as Read
- Mark as New
- Bookmark
- Highlight
- Report Inappropriate Content
Wow, these are classic and beautiful with so many purposes. Thanks for sharing (saving for one day in the future!)
- Mark as Read
- Mark as New
- Bookmark
- Highlight
- Report Inappropriate Content
These look amazing.
- Mark as Read
- Mark as New
- Bookmark
- Highlight
- Report Inappropriate Content
Welcome to the Bunnings Workshop community @Bushka. It's sensational to have you join us, and great to see you've enjoyed this project.
Let me tag @JoeAzza so they are alerted to your kind comment.
Would you be interested in building something similar? If so, our knowledgeable community member would be more than happy to provide guidance.
We look forward to hearing all about your projects and plans around the house and garden. Feel free to reach out any time you need assistance or have something to share with the community.
Please let me know if you have any questions.
Mitchell
Why join the Bunnings Workshop community?
Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects