elbow's Bookmarks

Hi @elbow, It's good to see an update on the windows you've been fixing up. Can you advise how wide the gap is? It looks to be around 20mm, but it ...

hey Jacob Thanks for coming back so supafast! Its much appreciated and thank you for the advice. ill try it out 

Hi @elbow, The advice I've received from the supplier is that this product is suitable for this application, you will just have to make it thick eno ...

Shouldn't be an issue at all @EricL @elbow to have the edge finished without any timbers. The corners/edges like any other corner plasterboard edge ar ...

Hi @elbow, all great suggestions in resolving your window surrounds, after reading all the comments, you certainly do not want to use timber , especia ...

Hi @elbow, As per the Gyprock installation guide, Gyprock CSR 20kg Drywall Masonry Adhesive is the correct product to use for your purposes. I note ...

Hi @elbow don't under-estimate the spread of dust cutting masonry will cause throughout the home. It's extremely fine and abrasive. So the main things ...

Hey Dave Well that's settled then  - thank you for confirming and thank you for your help, much appreciated!

Afternoon @elbow @MitchellMc has beaten m eto the punch He has suggested exactly what I was going to right down to the melamine for the formwork, I ha ...

You don't need to bond the surfaces, but you'll likely find that a crack will develop there over time due to movement @elbow. To prevent this you coul ...