So here is the throne in its better days.
Now it is looking worse for wear. The seat has golden-ish metal buttons with metal loops. They show tarnish. ...
In 2011, I built this lovely Santa throne from plans bought from the USA. The majority of the timber came from Bunnings Parafield. Since then it has s ...
I'm getting close to throwing my doorbell out the window. We recently switched from fibre to 5G. All is good BUT silly me deleted the doorbell from ...
My builder installed a new door then slapped a quick coat of paint on to weather proof it. I was on holidays. I can back to do the final coat and noti ...
Hi there,
Considering purchasing a Wagner Spray Gun to use over the weekend. The Wagner W100 and Wagner W350 seem to both be well reviewed. The W100 ...
Hi everyone,I've been a longtime reader of the workshop forum and have really enjoyed the positive and constructive community atmosphere, not to menti ...
Hello!
the bottom of my doorframe in the bathroom has some rust that’s come from a leaking shower screen. How do I fix the rust so I can repaint ove ...
Hi,
I need to install James Hardie axon cladding, based on my reading on internet, I can use brad nails or fiber cement nails. If I prefer fiber cem ...
Hi All, I recently bought an old town house with predominantly west facing single-glazed windows and am now looking at adding an extra glaze to the wi ...
This is a simple floating desk to fill the void created when we did the bathroom renovations.
It sits a little too high for my liking but we'll rect ...
I needed to make something to lift two plant pots off a floating timber panel floorboard in one hour flat, so I used some offcuts from a previous proj ...
I needed to make something to lift two plant pots off a floating timber panel floorboard in one hour flat, so I used some offcuts from a previous proj ...