Workshop
Ask a question

The Bunnings Workshop community can help with your home improvement projects.

Whole of House

Help for projects that encompass the entire house
woodenwookie
Making a Splash
5 replies

This is a simple floating desk to fill the void created when we did the bathroom renovations. It sits a little too high for my liking but we'll rect ...

AbhiS
Community Newcomer

Hi, I need to install James Hardie axon cladding, based on my reading on internet, I can use brad nails or fiber cement nails. If I prefer fiber ceme ...

fadetoblack
Finding My Feet
15 replies

Hi All, I recently bought an old town house with predominantly west facing single-glazed windows and am now looking at adding an extra glaze to the wi ...

Benskimo
Making a Splash
4 replies

I needed to make something to lift two plant pots off a floating timber panel floorboard in one hour flat, so I used some offcuts from a previous proj ...

MackaQLD
Growing in Experience
8 replies

        I would like to renovate my “rumpus room” which was already converted from the garage by previous owner. It appears the plasterboard ha ...

macrak4
Finding My Feet
10 replies

Hi. After 28 years the spiral balance in one of my front windows has quit in me. Quote to repair $420. Happy to DIY but while there are plenty o ...

hessian86
Getting Established
3 replies

We have just moved into our new house, and are starting to renovate, however the previous owners got paint on the external bricks. Is there a way to r ...

gjhugs
Just Starting Out
6 replies

I have pine stringers on a newly constructed staircase. The treads are blackbutt with intergrain non-slip treatment. I want to stain/varnish the pine ...

RLD
Finding My Feet
18 replies

Does anyone know why hollow core doors have a striped/ridged edge? And can it be removed? Hume brand hollow core doors from Bunnings were used in my h ...

Taroon
Just Starting Out
1 reply

Hi There I need to put fly screen to my awning windows. it looks like it has got required frame and if I get the right size fly screen I should be a ...

Scout1
Just Starting Out
1 reply

I've just had new skirting boards installed and there's quite a bit of gap in the mitred corners. Is this normal and I should just fill with No More G ...

diy_vvv
Getting Established
4 replies

It’s not a hole for a screw driver    

Why join the Bunnings Workshop community?

Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects