Changing celling rose to batten light holder

[Joel]

Hi guys I bought a pendent light from Bunnings and it plugs into a batten holder but first I’m going to have to change over from a celling rose to a battan holder I went to change ober today and I turned off the light circuit at the box and all the lights on that circuit went off but I am still getting a reading with a no contact detector would anyone know of what the reason would be, also I had another question there are 3 lots of wires   Running to the rose do I just put all 3 neutral into one terminal on batten holder, all 3 active and all 3 earth? 

Thanks

[Kermit]

Suggest you call an Electrician @Joel!

[Joel]

I’d rather do it my self also I accept all liability

[Brad]

Is there a 2 way switch for that light?

In my kitchen and lounge room there is 2 sets of switches, I have no idea how that works even though I have wired up 415V at work that as @Kermit says is a job for an Electrician.

[Joel]

Yeah I’m a little unsure on 2 way switches my self haha but no there’s not also I now think the problem is a earth leak but if anyone had any other ideas i would be interested to hear them

[Jason]

Hi @Joel,

Welcome to Workshop. I hope you find plenty of useful advice from our community members, as well as inspiration for your projects. 

Feel free to post anytime you need a hand. On this occasion however, I would like to reiterate the other members and advise that you always get a qualified electrician to complete any electrical work on your home. If you are not a qualified electrician, then performing electrical work is not only illegal but very dangerous.

All the best,

Jason