Workshop
Ask a question

The Bunnings Workshop community can help with your home improvement projects.

Top 10 most popular VJ panelling projects

Akanksha
Retired Team Member
Retired Team Member

Top 10 most popular VJ panelling projects (2).png

 

VJ panelling can be a simple and cost-effective way of adding style and flair to a room.

 

Bunnings Workshop members have shared many examples of how VJ panelling has added style and character to different parts of their homes.

 

Below are the top 10 most popular VJ panelling projects by pageviews: VJ panelling feature wallVJ panelling feature wall

 

1. VJ panelling feature wall by @craftyhopper 

 

Leanne covered an eyesore and created an elegant feature wall with VJ panelling.

 

2. Recessed TV feature wall with EasyVJ panels by @ProjectPete  

 

Experienced Workshop member Pete transformed a plain brick wall in his living room into a stylish feature wall using EasyVJ panels.

 

3. Kitchen island EasyVJ panelling by @ProjectPete  

Pete also used Easycraft EasyVJ 63mm panelling on his kitchen island and painted with British Paints Mossy Road. Kitchen island EasyVJ panellingKitchen island EasyVJ panelling

 

4. Bathroom makeover on a strict budget by @craftyhopper  


VJ panels were cut to fit close to a bathroom's tile and cornice so the only gaps to fill were pin holes from a nail gun.

 

5. Nib wall bedhead with VJ panels by @EleventhCoastal  

Kirsty shared a nib wall bedhead with VJ panelling and floating shelves.

 

6. Bedroom picture ledge with VJ panel wall by @TheRenoDad 

A VJ feature wall with a Pine ledge that gives the whole bedroom a lift.

 

7. Laundry, shower and toilet makeover by @Joe3333 

Joe installed water-resistant VJ panel boards while renovating his laundry, shower and toilet area. VJ panelling bedroom makeoverVJ panelling bedroom makeover

8. Wall panelling in kids bedroom by @kingj11  

Using three 1m wall panels painted in Dulux Paris Green Matte, Workshop member kingj11 created a feature wall and finished it with a Tasmanian Oak trim.

9. VJ panelling bedroom makeover by @craftyhopper  


VJ panelling painted in the colour Yacht Race and Rubble by Porter's Paints helped create a bright bedroom retreat.

10. Coastal bathroom reno with VJ panelling by @tamaraharringd 

While giving her bathroom a makeover, Tamara used VJ wall panelling to save money on tiling.


How to create a VJ feature wall

Creating a feature wall is easy with VJ wall panels. Follow the simple steps from the Bunnings team in the guide How to create a VJ feature wall.


You can also use VJ panels to build a barn door. Experienced Bunnings Workshop member Mariana (@lifestylebymari) has shared a step-by-step guide on How to build a barn door with VJ panels.


More inspiration for your VJ panelling projects

Bunnings Workshop community members have shared many other terrific projects that you can use as inspiration for your next VJ panelling project, including: Home office update with VJ panellingHome office update with VJ panelling


For more inspiration for your home, also check out 3 ways to create a feature wall and 5 feature walls with wainscoting.

 

Last updated: November 2023

 

6 Replies
MrBajaj
Finding My Feet


Hi All 
I feel so amazed when I look at the projects of VJ paneling done
I am attaching few images of the area where I am planning to install the VJ panels . Can I please request the experts to guide for the below things
1) How to End the VJ Panels . ( Wall 2 : 1760 Wide and 2500 Height ) What to install to flush the VJ panels from top and from sides. Also is it best to make a box around VJ panels using Architrave.
2) Wall 1 ( Should I use the Architrave around the door of use the VJ panel as Architrave )
3) TV Wall : How to join the VJ panels from the left side of the Wall to the right end of the Door. Is there any corner joints we can use for the VJ panels which cover the joints.
4) At last which is the best paint & primer to use on the VJ Panels.

out of the below which panels are easy to paint and look nice

https://www.bunnings.com.au/easycraft-9-x-2700-x-1200mm-easyvj100-primed-general-purpose-wall-lining...
https://www.bunnings.com.au/easycraft-9-x-3000-x-1200mm-easyregency150-primed-general-purpose-wall-l...

Thanks you so much for reading and replying to this post. ( Images are attached for your reference )

.
TV Wall.jpegWall 1.jpegWall 2.jpeg

MitchellMc
Bunnings Team Member
Bunnings Team Member

Hi @MrBajaj,

 

To end the VJ panels neatly at the top and sides, you can install architrave (timber trim) around the panels, particularly where they meet the ceiling and walls. At the top, a ceiling batten or flat architrave should be used to cover the gap between the panels and the ceiling, giving it a clean, seamless finish. On the sides, a side architrave will cover the junction between the panels and the walls, creating a flush, polished look. If you want to add a finishing touch at the bottom, skirting boards can be installed to cover any gaps between the panels and the floor. 

 

When it comes to the area around the door, continue the VJ panels around the door opening and then add an architrave around the door to finish it off.

 

For corners, you can simply butt the panels up against each other, and to cover the joint, you can use a small timber trim like quad moulding, which will create a neat transition. 

 

As for the panels themselves, both the Easycraft VJ100 and Easycraft Regency150 panels come pre-primed, making them both easy to paint. You can use a quality wall paint such as Dulux Wash & Wear for a durable, long-lasting finish.

 

Please let me know if you have any questions.

 

Mitchell

 

MrBajaj
Finding My Feet

Hi  @MitchellMc

Thanks a lot for your reply.

 

Can you please share the Item number for 
1) At the top, a ceiling batten or flat architrave should be used to cover the gap between the panels and the ceiling
2) skirting boards can be installed to cover any gaps between the panels and the floor
3) https://www.workshop.bunnings.com.au/t5/user/viewprofilepage/user-id/52?lightbox-user-images=61760i1... ProjectPete Love your work. ( This is my Favourite )






Regards

S Bajaj

Dave-1
Community Megastar

Good Morning @MrBajaj 

1 - Plaster Cornice  or timber cornice  could be used. I actually made up a shape out of two types for my garage. Tho kicked myself when I found a very similar item on the shelves afterwards :smile: It really comes down to the style you want and what you have in your house or room. Id suggest to keep all the main areas (hallways, lounge/kitchen ) the same and if you want you could do the rooms differently but may end up looking a little odd.

 

2 - skirting boards can be all sorts and as point one it depends on what you want. Same rulings apply. Keep the main areas the same, smaller rooms could be switched but may look odd. When I redid my flooring in the lounge, hallways and bedroom I choose to go with a larger straight edged rectangle profile as it looked more modern. When considering what profile to use factor in how you will cut and fit what you want.

 

3 - That is a stylish wall, I havnt done a wall such as @ProjectPete but am considering one like it for my foyer. I cant see any edging or overlays so it looks like he has measured and calculated to have it fit correctly. Please note that not all walls are square or even corners. I have tagged projectPete in case he is around and can offer suggestions on how he did it. 

 

As a side not @Nailbag has also done paneling walls and may be able to offer an idea on how to.

 

Dave

MitchellMc
Bunnings Team Member
Bunnings Team Member

Some great info provided by @Dave-1 there, @MrBajaj. I've linked to the product sections and it would be up to you to choose which of those profiles that you prefer.

 

Regarding the inspiration project you've linked to they have used a cornice at the top and a small timber moulding at the bottom.

 

Mitchell

 

Nailbag
Kind of a Big Deal

Hi @MrBajaj 

 

This is one of the projects I did that @Dave-1 mentioned. Our ensuite didn't have a door so I took the opportunity to replace the plasterboard wall with VJ when installing the cavity slider.

 

I took my panels hard to the ceiling by using small packers that you can't see on the bottom as they are concealed by the carpet and underlay. I gave myself a 5mm gap on the right side to allow for the intersecting walls not to be 100% true, then used a flexible gap sealer, which was painted over. It was also the curtain side so that was also going to provide some forgiveness. I installed the sheets right to left so the only visual misalignment is a small section top left of the door frame, which is barely noticeable. Again allowing a few mm forgiveness to fill with sealant. The gaps also allow to work each sheet in to place.

 

Nailbag

 

Finished panelsFinished panels

 

Right side wallRight side wall

 

Left side wallLeft side wall

 

Raised off floorRaised off floor

 

 

Why join the Bunnings Workshop community?

Workshop is a friendly place to learn, get ideas and find inspiration for your home improvement projects